Linksys WAP54GP Bedienungsanleitung PDF herunterladen (Seite 24)

Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet

The Wireless - Wireless Security Tab

Wireless-G Access Point with Power Over Ethernet

RADIUS

This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS

server is connected to the Access Point.)

Allow PCs with the same wireless network name (SSID) to see each other. When enabled, devices in the

same wireless network will be able to access each other, so they can transfer files through the network. To deny

access, select Disabled. Otherwise, keep the default, Enabled.

RADIUS Server IP Address. Enter the RADIUS server’s IP address.

RADIUS Server Port. Enter the port number used by the RADIUS server.

Shared Secret. Enter the Shared Secret key used by the Access Point and RADIUS server.

Default Transmit Key. Select a Default Transmit Key (choose which Key to use).

WEP Encryption. Select a level of WEP encryption, 64 bits (10 hex digits) or 128 bits (26 hex digits).

Passphrase. To generate WEP keys using a Passphrase, then enter the Passphrase and click the Generate key.

Key 1-4. If you want to manually enter WEP keys, then complete the fields provided. Each WEP key can consist of

the letters “A” through “F” and the numbers “0” through “9”. It should be 10 characters in length for 64-bit

encryption or 26 characters in length for 128-bit encryption.

Change these settings as described here and click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes. Click Help for more information.

Figure 5-7: Wireless Security - RADIUS Screen

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 66 67

Keine Kommentare

Linksys WAP54GP Bedienungsanleitung Seite 24