Linksys WUSB54GP Bedienungsanleitung Seite 27
- Seite / 45
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
21
Chapter 5: Using the WLAN Monitor
Creating a New Profile
Wireless-G Portable USB Adapter
3. Enter your network’s settings on the Network Settings screen, which appears next.
If your network has a DHCP server (or Router), click the radio button next to Obtain an IP address
automatically (DHCP) and click the Next button to continue.
If your network does not have a DHCP server (or router), click the radio button next to Specify the IP
address. Enter an IP Address, Subnet Mask, Default Gateway, and DNS appropriate for your network.
Enter each address in this format: xxx.xxx.xxx.xxx (the x’s represent the numbers that make up each
address). You must specify the IP Address and Subnet Mask on this screen. If you are unsure about the
Default Gateway and DNS addresses, then leave these fields alone.
IP Address - This IP Address must be unique to your network.
Subnet Mask - The Adapter’s Subnet Mask must be the same as your wired network’s Subnet Mask.
Default Gateway - Enter the IP address of your network’s Gateway here.
DNS - Enter the DNS addresses of your network here.
Click the Next button to continue or the Cancel button to return to the previous screen.
4. The Wireless Mode screen shows a choice of two wireless modes. Click the Infrastructure Mode radio
button if you want your wireless computers to communicate with computers on your wired network via a
wireless access point. Click the Ad-Hoc Mode radio button if you want multiple wireless computers to
communicate directly with each other. Click the Next button to continue or the Back button to return to the
previous screen.
SSID - The SSID is the unique name shared among all devices in your wireless network. The SSID must be
identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 alphanumeric
characters, which can be any keyboard character.
Infrastructure Mode - This mode allows wireless and wired networks to communicate through an access
point.
Ad-Hoc Mode - This mode allows wireless-equipped computers to communicate directly with each other. No
access point is used.
Figure 6-10: Profiles - Network Settings
Figure 6-11: Profiles - Wireless Mode
- Wireless-G 1
- Copyright and Trademarks 2
- How to Use this User Guide 2
- List of Figures 5
- Chapter 1: Introduction 7
- What’s in this Guide? 8
- Network Topology 10
- Network Layout 11
- Windows 2000 12
- Using the USB Extension Base 17
- Wireless-G Broadband Router 18
- Accessing the WLAN Monitor 21
- The Link Information Tab 21
- Overview 21
- The Profiles Tab 24
- Creating a New Profile 27
- Appendix A: Troubleshooting 30
- Frequently Asked Questions 31
- Appendix B: Wireless Security 34
- Appendix C: Windows Help 37
- Appendix D: Glossary 38
- °C ~ 85°C (-40°F~ 185°F) 42
Verwandte Produkte und Handbücher für Hardware Linksys WUSB54GP
Hardware Linksys AG241 Bedienungsanleitung
(80 Seiten)
(80 Seiten)
Hardware Linksys USB300M Bedienungsanleitung
(31 Seiten)
(31 Seiten)
Hardware Linksys SPA2102 Bedienungsanleitung
(96 Seiten)
(96 Seiten)
Hardware Linksys AG041 Bedienungsanleitung
(80 Seiten)
(80 Seiten)
Hardware Linksys NSLU2 Bedienungsanleitung
(38 Seiten)
(38 Seiten)
Hardware Linksys NSS4000 Bedienungsanleitung
(24 Seiten)
(24 Seiten)
Hardware Linksys WAG200G Bedienungsanleitung
(39 Seiten)
(39 Seiten)
Hardware Linksys RV0041 Bedienungsanleitung
(99 Seiten)
(99 Seiten)
Hardware Linksys WPS54G Bedienungsanleitung
(74 Seiten)
(74 Seiten)
Hardware Linksys WUSB11 Bedienungsanleitung
(22 Seiten)
(22 Seiten)
Hardware Linksys RV082 Bedienungsanleitung
(105 Seiten)
(105 Seiten)
Sony XBR-52HX909 manuals
Owner’s manuals and user’s guides for Televisions Sony XBR-52HX909.
We providing 2 pdf manuals Sony XBR-52HX909 for download free by document types: User Manual
Kommentare zu diesen Handbüchern