Linksys USB100TX Bedienungsanleitung PDF herunterladen

Making Connectivity Easier

™

1. Verify that your PC is powered on and that you are at the Windows

98 desktop.

2. Insert the USB cable’s square B-type plug into the adapter’s B-type

port.

3. Connect your adapter to a hub or switch using a straight-through

network cable. The RJ-45 jacks should fit into the RJ-45 port on

both the adapter and the hub.

• When connecting to a cable or DSL modem, you may have to use

the modem vendor’s Ethernet cable.

4. Insert the other end of the USB cable (the A-type connector) into

your PC’s USB port. The adapter is now connected to your PC.

5. After connecting the EtherFast 10/100 USB Network Adapter, your

computer will automatically detect the presence of the Linksys

USB adapter connected to your computer.

6. When the Add New Hardware Wizard window appears, insert the

EtherFast 10/100 USB Network Adapter Driver Disk into floppy-

drive A and click Next.

7. When the following window appears, select Search for the best

driver for your device (Recommended). Click Next.

8. When the next window appears, select Specify a location and type

a:\Win98 in the drop down box. Click Next.

9. Windows will begin searching your floppy drive for the correct

device drivers. A message will appear that reads Linksys EtherFast

10/100 USB. Click Next.

10. Windows 98 will begin copying a number of files onto your com-

puter.

• If Windows asks you to supply the original Windows 98 CD-ROM,

insert the CD-ROM now and direct Windows to the proper loca-

tion for the disk (e.g. “D:\”). You may also have the Windows 98

setup files already installed in a “CABS” directory (e.g. “c:\win-

dows\options\cabs”). Once this is done, click OK.

• If Windows asks you to supply a driver containing the letters

“usb100”, insert the EtherFast 10/100 USB Network Adapter

Driver Disk into the floppy drive and type a:\win98 in the Copy

Files From box. Click OK.

Continued on back...

This sheet will guide you through the basic steps needed to install this

Linksys product on your computer. If you have any problems during

installation, visit our support page at www.Linksys.com.

Quick Installation

For Windows 98

Model No.:USB100TX

10/100 USB Network Adapter

EtherFast

1 2

Quick Installation 1
NNoottee 2

Inhaltsverzeichnis

Seite 1 - Quick Installation

Making Connectivity Easier™1. Verify that your PC is powered on and that you are at the Windows98 desktop.2. Insert the USB cable’s square B-type pl

Seite 2 - NNoottee

11. When the Add New Hardware Wizard indicates that it has finishedinstalling the software, click Finish. 12. When asked if you want to restart your c

Kommentare zu diesen Handbüchern

Keine Kommentare

Linksys USB100TX Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Linksys USB100TX herunter. Linksys USB100TX User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Linksys USB100TX