Linksys BEFW11S4 Bedienungsanleitung PDF herunterladen (Seite 20)

EtherFast

Wireless Access Point + Cable/DSL Router with 4-Port Switch

Dynamic Routing

With Dynamic Routing you can automatically adjust to physical changes in

the network's layout. The router, using the RIP protocol, determines the net-

work packets’ route based on the fewest number of hops between the source

and the destination. The RIP protocol regularly broadcasts routing informa-

tion to other routers on the network. To set up Dynamic Routing:

1. Choose the correct working mode. Gateway Mode should be used if your

Linksys router is hosting your network's connection to the Internet.

Router Mode should be selected if the router exists on a network with

other routers.

2. In the TX field, choose the protocol by which you transmit data on the

network.

3. In the RX field, choose the protocol by which the Router receives net-

work data.

4. Click the Apply button to save your changes.

Dynamic Routing

For

Port forwarding sets up public services on your network. When users from the

Internet make certain requests of your network, the router will forward those

requests to the appropriate computer. The router's DHCP function must be

disabled to use Forwarding.

Forwarding is generally used to set up a web server, ftp server, or e-mail serv-

er on your network. To add a server using Forwarding:

1. Enter the port number or range used by the server. On the same line,

select TCP, UDP or Both. Enter the IP Address of the server that you

want the Internet users to be able to access. Refer to your software docu-

mentation for more information concerning which service port settings

may need to be changed, if any.

2. Configure as many entries as you would like until all of the link entries

are filled.

3. Click Apply to save the settings.

Forwarding

Instant Broadband

Series

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

Keine Kommentare

Linksys BEFW11S4 Bedienungsanleitung Seite 20