Linksys PSUS4 Bedienungsanleitung PDF herunterladen

Model No.

Quick Installation

A Division of Cisco Systems, Inc.

Model No.

WIRED

PSUS4

with 4-Port Switch

PrintServer for USB

Package Contents

• One PrintServer for USB with 4-Port Switch

• One Power Supply

• One Setup CD with User Guide

• One Ethernet Network Cable

• One USB cable

• One Quick Installation

• One Registration Card

Before starting the physical installa-

tion, note the PrintServer’s Default

Name on the bottom of the Print-

Server for future use.

A Plug one end of the Ethernet

network cable into one of the

PrintServer’s LAN Ports (1-4).

(See Figure A.)

B Connect the other end of the

cable into your networked hub,

switch, or router. The distance

between the PrintServer and

the other device should not

exceed 328 feet (100 meters).

C Use the USB cable to connect

your printer to the PrintServer’s

USB port. Plug the Type A con-

nector end into the PrintServer

(Figure D) and the Type B con-

nector end into the printer.

D Power on your printer.

E Plug the power adapter cord

into the PrintServer’s Power port,

which is located on the right

side of the PrintServer. (See Fig-

ure F.)

F Plug the power adapter into

an electrical outlet.

The PrintServer connection is com-

plete. Go to Step 2.

Connecting the PrintServer

F The Basic Settings screen,

shown in Figure F, will appear. If

you want to change the

Device Name or Domain

Name, enter the Device Name

and Domain Name in the

respective fields. Click Next.

G The IP Settings screen, Figure

G, appears next. If your network

uses a router with a DHCP Inter-

net Protocol setting that auto-

matically assigns an IP

address, select Automatically

obtain an IP address (DHCP). If

your network uses a static IP

address, select Set IP configu-

ration manually, and enter the

IP Address, Subnet Mask, and

Gateway in the fields provided.

Click Next.

H The next screen that appears is

the Set PrintServer’s Password

screen, shown in Figure H. If

you want to change your pass-

word, enter your current pass-

word in the Current Password

screen. Enter the new pass-

word in the New Password field,

then enter it again in the Verify

Password field. Click Next.

Configuring the PrintServer

Insert the Setup CD-ROM into

the computer’s CD-ROM drive.

The Setup CD-ROM should run

automatically. If it does not,

click the Start button and

choose Run. In the box that

appears, enter D:\setupWiz-

ard.exe (if “D” is the letter of

your CD-ROM drive).

B When you see the Welcome

screen, Figure B, click Setup

Wizard to continue.

C The screen in Figure C will

appear while the Setup Wizard

is searching for the USB Print-

Server.

D After the Setup Wizard has

found the USB PrintServer, the

screen in Figure D will appear.

If this is the first time you have

run the Setup Wizard, make

sure that List only new (uncon-

figured) Print Servers is selected

and your Print Server is listed by

its default server name. If you

have previously configured the

Print Server, select List all com-

patible Print Servers. Click Next

to continue.

E The Password screen, Figure E,

will appear next. Enter the

default password admin in the

field. Click Enter.

IMPORTANT: Make sure to use

the power adapter that is sup-

plied with the PrintServer. Use of

a different power adapter could

damage the PrintServer.

1 2

Inhaltsverzeichnis

Seite 1 - PrintServer for USB

Model No.Quick InstallationQuick InstallationA Division of Cisco Systems, Inc.®Model No.WIREDPSUS4with 4-Port SwitchPrintServer for USBPackage Content

Seite 2 - Windows Driver Installation

ILinksys recommends that you set up your printer and install your printer’s driver before you install the Print-Server’s driver.A If you haven’t alrea